The EV NetMax N8000 is an extremely flexible audio control processor for a wide range of applications. Presented in a compact 2RU configuration, the N8000 can be configured a number of ways to fit the need at hand. By simply selecting the right combination of I/O cards, the N8000 matrix can be configured IN THE FIELD to one of six matrix layouts. Up to a full 32 channels of digital audio are also available when you add CobraNet™ functionality to any of these configurations for extended flexibility.
Superior Audio Performance
The N8000 provides the same legendary audio dynamic range as our amplifiers and signal processors. Superior A/D and D/A conversion technology, and wideband electronics ensure that the NetMax N8000 will be an invisible link in the audio chain.
Easy Interface To The Outside World
The N8000 can be configured from the Web, an Ethernet connection using IRIS-Net, an RS-232 interface, or a common USB link. In addition, the N8000 can talk through its integrated CAN bus with any compatible IRIS-Net hardware, such as the Electro-Voice remote control amplifier series. For even more flexibility, the N8000 comes equipped with a GPIO network so it can control and be controlled through simple logic signals and contact closures.
Dx46
Two-in/six-out FIR-Drive sound system processor
IRIS-Net software provides complete control, monitoring and supervision
FIR-Drive loudspeaker optimization
Analog and AES/EBU inputs
Switchable -6 dB pre-A/D converter pad
24-bit AD/DA conversion
48-bit filter algorithms
115 dB dynamic range
Ethernet and USB data interfaces
Dedicated array EQ and delay sections
4 separate delay sections
5 contact closure inputs
DC-One
Two-In-Six-Out Loudspeaker Processor
Based on a two-in, six-out topology, the DC-One is designed primarily for users of small-to-medium sized sound systems in both mobile and installed applications. While the unit is an all-new development based on a powerful SHARC processor, it is 100 percent compatible with all settings from other Electro-Voice signal processors, including the Dx38—the best choice for achieving maximum performance with an EV loudspeaker system.
A large part of DC-One’s development was aimed at ensuring that users can easily handle its serious digital horsepower and high-end audio performance. Though free PC-Editor software is available, the DC-One can be easily operated via the front panel. Direct access buttons, six predefined configuration modes (one being free configuration), straightforward output delay settings, and true professional metering all allow for safe operation.
DC-One's unique "front-panel access control" allows the user to select a personal library of accessible presets (out of 60 factory and 20 user presets). In addition, the user can determine which individual parameters in each preset are locked (e.g. factory predefined output parameters) or editable (e.g. master EQ or delay settings).
The DC-One has a 19-inch chassis that is deep enough to match typical amplifier depths, a front panel USB connector for the PC-Editor, and accepts either analogue or digital (AES-EBU) input signals; a six-dB input pad is available. The RS232 on the rear also provides eight contact closures for preset changes, or allows two units to be linked for larger systems. The PC-Editor software, as well as firmware updates allowing additional functions, will be available on www.electrovoice.com
AC-One
AC Series Analog Audio Controllers
The AC-One Controller is a combination of newly-patented PowerMax crossover filter an unusually flexible, three-band EQ a continuously variable infrasonic filter EV's LPN bass/dynamics processing. The AC-One is designed for use with sound systems that use two-way speakers, plus subwoofers. Its excellent audio performance, dynamic range of 117 dB, extremely low noise level, and outstanding price-performance ratio make the AC-One Controller an great alternative to conventional crossover and controller solutions.
